APPLICATION OF THE SPOLDING PROFILE TO DETERMINATE THE COORDINATE OF THE OUTER BOUNDARY OF THE VOLUME CONDENSATION AREA IN A TURBULENT BOUNDARY LAYER DURING HUMID AIR COOLING
Keywords:
humid air, volume condensation, laminar sublayer, buffer sublayer, near-wall area, turbulent boundary layer.Abstract
A method for determining the coordinates of the outer boundary of the volume condensation area in a turbulent boundary layer during humid air cooling is proposed. Assuming the existence of a triple analogy function called the Spalding profile to use a single to describe the shapes of the curves of the flow parameters in the laminar sublayer and in the transit (buffer) sublayer of the near-wall part of the turbulent boundary layer is proposed. In the turbulent part of the layer to use the generally accepted power-law dependence to describe the shapes of the flow parameters change curves is proposed. It is shown that the refinement of the shape of the curves of the change in flow parameters leads to the refinement of the coordinate of the outer boundary of the sublayer of volumetric condensation of steam from the cooled humid air.
References
Levin A.B., Lopatnikov M.V., Khromenko A.V. Determination of the Coordinate of the Outer Boundary of the Volume Condensation Sublayer Inside the Laminar Boundary Layer During Humid Air Cooling. Conference: 2020 International MultiConference on Industrial Engineering and Modern Technologies (FarEastCon) 978-1-7281-69514/20/$31.00 (c) 2020 IEEE.
Levin A. B., Lopatnikov M.V., Hromenko A.V. Opredelenie koordinaty vneshnej granicy podsloya obemnoj kondensacii vnutri turbulentnogo pogranichnogo sloya pri ohlazhdenii vlazhnogo vozduha // American Scientific Journal, № (39), Vol.2, 2020. P. 18 – 22.
Burcev S.I., Cvetkov Yu.N. Vlazhnyj vozduh. Sostav i svojstva: Ucheb. Posobie. – SPb.: SPbGAHPT, 1998. – 146 s.
Amelin A.G. Teoreticheskie osnovy obrazovaniya tumana pri kondensacii para. Izd.3-e, dop. i pererab., M.: «Himiya», 1972, 304 s.
Grudnikov, L. V. Eksperimentalnoe issledovanie teplo- i massoobmena na elementah trubchatyh teploobmennikov osushitelej vozduha, rabotayushih v usloviyah smeshannoj konvekcii: dissertaciya na soiskanie uchenoj stepeni kandidata tehnicheskih nauk: 05.14.05. – Moskva, 1979. - 157 s.: il.
Semenov Y. P, Belekov V. A., Dmitroc V. A., Levin A.B. Experimental and analytical study of heat and mass transfer by mixed convection from horizontal cylinder to flow of humid air // 6th Int. Congr.of Ch. Engineering, Ch. Equipment design and automation, ChISA, Praha, Czechoslovakia, August 21 – 25, 1978. D1.4
Shlihting G. Teoriya pogranichnogo sloya. – M.: «Nauka», 1969. S. 593.
Sebisi T., Bredshou P. Konvektivnyj teploobmen. Fizicheskie osnovy i matematicheskie metody: Per. s angl. – M.: Mir, 1987. – S.225.
Teoriya teplomassoobmena: Uchebnik dlya vuzov/S.I. Isaev, I.A. Kozhinov, V.I. Kofanov i dr.; pod red. A.I. Leonteva. –M.: Vysshaya shkola, 1979. S. 223.
Spalding, D.B., "A Single Formula for the Law of the Wall,” J. Applied Mechanics, Transaction of the ASME, Series E.,Vol. 83, 1961, p. 455.
Anthony Kendall A., Koochesfahani M. A Method for Estimating Wall Friction in Turbulent Boundary Layers. 25th AIAA Aerodynamic Measurement Technology and Ground Testing Conference5 - 8 June 2006, San Francisco, California. AIAA 2006-3834/
Osterlund, J. M., “Experimental Studies of Zero Pressure-Gradient Turbulent Boundary-Layer Flow,” Ph.D. thesis. Department of Mechanics, Royal Institute of Technology, Stockholm, 1999.
Osterlund, J. M., Johansson, A.V., Nagib, H. M., and Hites, M. H., “A Note on the Overlap Region in Turbulent Boundary Layers,” Phys. Fluids, 12, 2000, pp. 1-4.
Tarabanov M.G, Korkin V.D, Sergeev V.F. Vlazhnyj vozduh. ABOK. Spravochnoe posobie – 2004. M.:2004, «NP AVOK», 2004. S. 72.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
CC BY-ND
A work licensed in this way allows the following:
1. The freedom to use and perform the work: The licensee must be allowed to make any use, private or public, of the work.
2. The freedom to study the work and apply the information: The licensee must be allowed to examine the work and to use the knowledge gained from the work in any way. The license may not, for example, restrict "reverse engineering."
2. The freedom to redistribute copies: Copies may be sold, swapped or given away for free, in the same form as the original.